Movable Screw Head
A screw head, which can move in different angles, this is a standard function which comes with the Inline Lacer. The movable head ensures that angle drilled spoke holes can be laced efficiently. This function is extremely useful for high-end carbon rims and Fatbike Rims.
Movable Lamp Option
The movable lamp option was designed to analyze spoke holes. The lamp folds over from the side and scans where the spoke holes are. With low rims a fixed camera is enough, but when you plan to lace high and wide rims spoke holes are located on different positions. The movable Lamp makes sure that the machine adjusts perfectly to the wheel and the lacing process will befall smoothly.
Ergonomic working is becoming more important and popular these days. Therefor Holland Mechanics provides a High-Low option. This ensures that operators are able to adjust the lacing machine to different heights. Switching from a seated position to a standing position is not only good for the operator's back, but avoids many symptoms.
Nipple Washer Option
The Nipple washer option is designed to provide a nipple with a Qlet. The Qlet is a round bowl shaped ring, which ensures that the nipple's position is directed towards the hub where the spoke ends. Wheel quality increases and stabilizing increases effectively
The tilt option is designed for wheel with paired spoke technology. When two spokes are attached at the same spot at the rim they have to be screwed towards both sides of the hub. The Tilt option on the lacer makes this possible.