OT Wheel Trueing Robot
Description
The Robot OT is the topmodel Trueing Robot especially designed for carbon and other high-end wheels. The wheels are trued from the nipple-head side which has multiple advantages compared to conventional trueing Robots. The mayor Robot OT benefits are that nipples do not scratch and the possibility to use TCS spokes (Torque Control Spokes). The Direct Drive System, whereby the motor which turns the nipple directly, results in a better spoke tension spread. Another benefit is the Spoke Tension Measuring System which measures the real tension of each spoke. With this spoke tension measurement the machine can calculate the revolutions of each nipple for a perfect trued and tensioned wheel. Because of this technology we can say that wheels from this Robot are better than hand-built wheels. The OT can be connected to the internet for Remote Service and is Industry 4.0 ready.
- Teach Inn principle for automatic and easy change over
- flexible mass production system
- constant quality output
- controlled wheel quality and spoke tensions
- suitable for light motorcycle wheels
- suitable for power assisted wheels
- front and rear wheels automatically detected without changing
- air pressure: min. 5 bar
- air consumption: 50 l/min.
- electrical connection: 230 V
- power consumption: 0,6 kW
- sound level: < 70 dB
- communication: Ethernet, RS-232 / Floorview®
- wheel dimensions: 24"28" rims
- capacity: 60-80 wheels/hour, depending on components and tolerances
- safety mark: CE
- dimensions (l × w × h): 1280 × 1230 × 2100 mm
- weight: 780 kg
- Touch screen interface
- TCC Robot: Twin Computer Controlled
- ESTC Electronic Spoke Tension Control
- Up to +/- 0.1 mm accuracy
- Multi-language communication via screen
- Direct automatic change-over
- Graphic interface under Windows
- Deep-v rims up to 65 mm (higher rims upon request)
- Self-diagnostic
- Production overview of 500 wheels
- ATA: Advanced Truing Algorithm
- Actuators for step-less spoke angle adjustments
- Stepwise Tensioning So ware
- Different voltages
- Automatic Wheel Identification by Wheel-ID®
- Multi-languages
- Flat spoke gripper system for bladed spokes
- Wheel ID by QR/Barcode
- Track & trace by barcode scanning
- Single nipple bit trueing (min. pitch 14mm)
OT by Hollandmechanics on Sketchfab