HB Stabilizer


For quality wheelbuilding, Stabilizing is an essential process developed by Holland Mechanics. It is used to spread the tension equally over all spokes, and at the same time improves the strength of the spoke necks and the seating of the nipple in the rim. The Stabilizer comes in two versions: HB for Stabilizing and the HT combines Stabilizing with rim tape application in one process. The Stabilizer or Rim taper will be placed inline between the lacing machines and the trueing Robots. The Stabilizer increases the wheel quality and on top of that the Rim taper saves labour costs, improves the tyre fitting quality (less flat tyres because of automatic rim tape centring) and brings huge inventory & logistics savings.

  • increase in wheel quality because of stress relieving
  • wheel safety
  • more stable wheel and stronger spoke neck
  • reduces loss of spoke tension after trueing with 70%
  • no more re-trueing by dealer
  • protects quality image of bicycle brand
  • air pressure: min. 5 bar
  • air consumption: 80 I/min.
  • electrical connection: 230 V
  • power consumption: 0.5 kW
  • sound level: < 70 dB
  • communication: RS-232 / optical (FloorView®)
  • wheel dimensions: 20"- 28"
  • capacity: 150 wheels/hour (36 spokes)
  • safety mark: CE
  • dimensions (l × w × h): 800 × 800 × 1600 mm
  • weight: 150 kg
  • Stress relief by adding force on every spoke before trueing
  • Fully automatic inline process
  • Better seating of nipple in rim
  • Communication with FloorView®
  • Better seating of spoke bend in hub flange
  • More equal spoke tensions within the wheel
  • Automatic spoke detection
  • Automatic rim tape: Q-Tape Application System
  • Automatic spoke lock: Q-Lock Application System
  • Different voltages