MS 1 - Stabilizer



Stabilizing a wheel is an essential part in the wheel building process. The MS pushes on to the spokes creating an equal tension in the wheel, and at the same time improve the strength of the spoke necks and the seating of the nipple inside the rim. It is possible to expand the stabilizer with functions such as applying Qlube or automatic rim taping.

  • Increase in wheel quality because of stress relieving
  • Wheel safety
  • More stable wheel and stronger spoke neck
  • Reduces loss of spoke tension after trueing with 70%
  • No more re-trueing by dealer
  • Protects quality image of Motor brand
  • air pressure: min. 5 bar
  • air consumption: 50 I/min.
  • electrical connection: 230 V
  • power consumption: 0.5 kW
  • sound level: < 70 dB
  • communication: RS-232 / optical (FloorView®)
  • wheel dimensions: 15"- 23", max. rim width 2.5"
  • capacity: 135 wheels/hour (36 spokes)
  • safety mark: CE
  • dimensions (l × w × h): 800 × 800 × 1600 mm
  • weight: 150 kg
  • Stress relief by adding force on every spoke before final trueing
  • Fully automatic inline process
  • Better seating of nipple in rim
  • Better seating of spoke bend in hub angle
  • More equal spoke tension in wheel
  • Automatic spoke detection
  • Communication with FloorView®
  • Automatic rim tape: QTape application system
  • Automatic spoke lock: Qlock application system
  • Different voltages