ASSEMBLY SOLUTIONS

Assembly Conveyor stations

Airline assembly conveyor

The Airline is a continuously moving hanging bicycle assembly conveyor which is motor driven. The line exists out of a head and tail with segments of 4 meters which can be added in-between. Operators can move freely around the assembly position to access certain parts of the bicycle

Floorline assembly conveyor

The Floorline is a continuously moving line with bicycle mounts. Bicycles can be rotated on the mounting 360 degrees horizontally. The line consists out of a head and tail with segments that can be added in between.

Stationary bicycle assembly station

Choose from three different configurations: a single hook with 1 clamp, 2 hooks with 2 clamps, or 4 hooks with 4 clamps.

Pre - Assembly

Chain cutter

An automatic machine to make chains to length

Brake Sleeve CuTter

brake sleeve cutting machine is designed for bicycle assembly factories that use large rolls of cable to cut them to lengths themselves

Brake sleeve Cap Inserter

Brake sleeve cap inserting machine is designed to speed up the process of cap application

CHAIN CUTTER

An automatic machine to make chains to length

BRAKE SLEEVE CUTTER

brake sleeve cutting machine is designed for bicycle assembly factories that use large rolls of cable to cut them to lengths themselves

BRAKE SLEEVE CAP INSERTER

Brake sleeve cap inserting machine is designed to speed up the process of cap application

Frame Preparations

Seat tube reamer

is used to widen the seat tube on the bicycle frame

Head-cup Press

a pneumatisch system to mount the headset cups in the frame

Alignment table

specially made for the alignment of bicycle frames

Bottom Bracket Machine Unit

a reaming, threading and facing system that can widen the tube, apply threading and face of any edge for a clean finish on the bottom bracket of the frame

Headset Tube Machine Unit

a reaming system that widens the tube to make head cups, steering wheel, and forks fit perfectly onto the frame

SEAT TUBE REAMER

Is used to widen the seat tube on the bicycle frame

HEAD-CUP PRESS

a pneumatisch system to mount the headset cups in the frame

ALIGNMENT TABLE

specially made for the alignment of bicycle frames

BOTTOM BRACKET MACHINE UNIT

a reaming, threading and facing system that can for the bottom bracket of the frame

HEADSET TUBE MACHINE UNIT

a reaming system that widens the tube to make head cups, steering wheel, and forks fit perfectly onto the frame

Fork Preparations

Fork Cup & Nut Assembly

Machine for mounting the head cup fork and nut

Fork STem Threading

Machine suitable for threading the fork stem

FORK CUP & NUT MOUNTING

Machine for mounting the head cup fork and nut

FORK STEM THREADING

Machine suitable for threading the fork stem

ASSEMBLY SOLUTIONS

ASSEMBLY CONVEYOR STATIONS

AIRLINE ASSEMBLY CONVEYOR

The Airline is a continuously moving hanging bicycle assembly conveyor which is motor driven. The line exists out of a head and tail with segments of 4 meters which can be added in-between. Operators can move freely around the assembly position to access certain parts of the bicycle

FLOORLINE ASSEMBLY CONVEYOR

The Floorline is a continuously moving line with bicycle mounts. Bicycles can be rotated on the mounting 360 degrees horizontally. The line consists out of a head and tail with segments that can be added in between.

STATIONARY BICYCLE ASSEMBLY STATION

bicycle assembly station 2 ways

Choose from three different configurations: a single hook with 1 clamp, 2 hooks with 2 clamps, or 4 hooks with 4 clamps.

PRE - ASSEMBLY

CHAIN CUTTER

An automatic machine to make chains to length

BRAKE SLEEVE CUTTER

brake sleeve cutting machine is designed for bicycle assembly factories that use large rolls of cable to cut them to lengths themselves

BRAKE SLEEVE CAP INSERTER

Brake sleeve cap inserting machine is designed to speed up the process of cap application

FRAME PREPARATIONS

SEAT TUBE REAMER

is used to widen the seat tube on the bicycle frame

HEAD-CUP PRESS

a pneumatisch system to mount the headset cups in the frame

ALIGNMENT TABLE

specially made for the alignment of bicycle frames

BOTTOM BRACKET MACHINE UNIT

a reaming, threading and facing system that can widen the tube, apply threading and face of any edge for a clean finish on the bottom bracket of the frame

HEADSET TUBE MACHINE UNIT

a reaming system that widens the tube to make head cups, steering wheel, and forks fit perfectly onto the frame

FORK PREPARATIONS

FORK CUP & NUT MOUNTING

Machine for mounting the head cup fork and nut

FORK STEM THREADING

Machine suitable for threading the fork stem

Holland Mechanics
en_USEnglish