Strict-Transport-Security: max-age=31536000; includeSubDomains; preload

InLine LAcing - IL


Air Pressure

Min. 5 bar

Elec. connection

230V (change on request)


35-55 wheels/hour

diameter RANGE

16"-29" inch


520 kg

Air Usage

90 L/min

Elec. Usage

1.2 kW


(L x W x H): 2150 x 1050 x 1300 mm

Rim range

Width: 50mm / Height: 40mm

Sound level

<70 dB

Experience the pinnacle of lacers

The Holland Mechanics’ Inline Lacer, a true masterpiece that takes your wheel production to new heights. At its core, it boasts inline nipple contact, ensuring tight lacing even with large spoke angles, making it an invaluable asset for high-end and e-bike wheels with substantial hub motors. Notably, this machine is the trusted choice of many renowned high-end carbon wheel brands.

What sets the Inline Lacer apart is its ability to seamlessly handle different wheel sizes, ranging from 16″ to 29″, thanks to its automatic change-over feature. But it doesn’t stop there – it goes a step further with automatic inline correction for each spoke group, ensuring precision at every stage of production.

This machine isn’t just about assembly; it’s about refinement. It combines lacing and tightening into a single operation, reducing the time required for truing in the Robot and significantly boosting overall efficiency. The Inline Lacer also offers a shuttle extension with the capacity for 8 differently colored nipples, showcasing its versatility and finesse.

With a database accommodating 1000 different wheel types, the Inline Lacer simplifies configuration and setup. It’s suitable for both radial and axial drilled/punched nipple holes, further expanding its utility. The moveable screwdriver, with radial adjustment of 15° and axial adjustment of 25°, adds to its flexibility.

  • Inline nipple contact for the tight lacing and large spoke angles
  • Automatic change-over from 16” – 29”
  • Automatic inline correction for each spoke group
  • Lacing & tightening in one
  • Database for 1000 wheel types
  • Suitable for radial and axial drilled/punched nipple holes
  • Moveable screwdriver: radial 15° – axial 25°
  • Automatic off set correction of nipple holes
  • Fit for paired spoke wheels
  • Automatic Deep-V
  • Moveable hub stud
  • Free Sequence programming (PST)
  • Suitable for remote service
  • Ergonomic chair
  • Wheelchair kit
  • E-bike kit
  • Adjustable work surface
  • Nipple washer feature
  • Inverted nipple kit
  • industry 4.0 ready
  • Fat up to 100 mm wide
  • High up to 60mm deep
  • High up to 90mm deep
  • Additional nipple/washer container
  • Manual TCS gripper
  • Foot pedal
  • Nipple rail sensor
  • Nipple sensor in tube
Holland Mechanics